The elements that you see in Windows PowerShell drives, such as the files and folders in the file system drives, and the registry keys in the Windows PowerShell registry drives, are called items in Windows PowerShell. The cmdlets for working with them item have the noun Item in their names.

The output of the Get-Command -Noun Item command shows that there are nine Windows PowerShell item cmdlets.

PS> Get-Command -Noun Item

CommandType	 Name							Definition
-----------	 ----							----------
Cmdlet		Clear-Item					Clear-Item [-Path] <String[]...
Cmdlet		Copy-Item					 Copy-Item [-Path] <String[]>...
Cmdlet		Get-Item						Get-Item [-Path] <String[]> ...
Cmdlet		Invoke-Item					 Invoke-Item [-Path] <String[...
Cmdlet		Move-Item					 Move-Item [-Path] <String[]>...
Cmdlet		New-Item						New-Item [-Path] <String[]> ...
Cmdlet		Remove-Item					 Remove-Item [-Path] <String[...
Cmdlet		Rename-Item					 Rename-Item [-Path] <String>...
Cmdlet		Set-Item						Set-Item [-Path] <String[]> ...

Creating New Items (New-Item)

To create a new item in the file system, use the New-Item cmdlet. Include the Path parameter with path to the item, and the ItemType parameter with a value of "file" or "directory".

For example, to create a new directory named "New.Directory"in the C:\Temp directory, type:

PS> New-Item -Path c:\temp\New.Directory -ItemType Directory

	Directory: Microsoft.Windows PowerShell.Core\FileSystem::C:\temp

Mode				LastWriteTime	 Length Name
----				-------------	 ------ ----
d----		2006-05-18  11:29 AM			New.Directory

To create a file, change the value of the ItemType parameter to "file". For example, to create a file named "file1.txt" in the New.Directory directory, type:

PS> New-Item -Path C:\temp\New.Directory\file1.txt -ItemType file

	Directory: Microsoft.Windows PowerShell.Core\FileSystem::C:\temp\New.Directory

Mode				LastWriteTime	 Length Name
----				-------------	 ------ ----
-a---		2006-05-18  11:44 AM		0 file1

You can use the same technique to create a new registry key. In fact, a registry key is easier to create because the only item type in the Windows registry is a key. (Registry entries are item properties.) For example, to create a key named "_Test" in the CurrentVersion subkey, type:

PS> New-Item -Path HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\_Test

   Hive: Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Micros

SKC  VC Name						 Property
---  -- ----						 --------
  0   0 _Test						{}

When typing a registry path, be sure to include the colon (:) in the Windows PowerShell drive names, HKLM: and HKCU:. Without the colon, Windows PowerShell does not recognize the drive name in the path.

Why Registry Values are not Items

When you use the Get-ChildItem cmdlet to find the items in a registry key, you will never see actual registry entries or their values.

For example, the registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run usually contains several registry entries that represent applications that run when the system starts.

However, when you use Get-ChildItem to look for child items in the key, all you will see is the OptionalComponents subkey of the key:

PS> Get-ChildItem HKLM:\Software\Microsoft\Windows\CurrentVersion\Run
   Hive: Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\Software\Micros
SKC  VC Name						 Property
---  -- ----						 --------
  3   0 OptionalComponents			 {}

Although it would be convenient to treat registry entries as items, you cannot specify a path to a registry entry in a way that ensures that it is unique. The path notation does not distinguish between the registry subkey named Run and the (Default) registry entry in the Run subkey. Furthermore, because registry entry names can contain the backslash character (\), if regsitry entries were items, then you could not use the path notation to distinguish a registry entry named Windows\CurrentVersion\Run from the subkey that is located in that path.

Renaming Existing Items (Rename-Item)

To change the name of a file or folder, use the Rename-Item cmdlet. The following command changes the name of the file1.txt file to fileOne.txt.

PS> Rename-Item -Path C:\temp\New.Directory\file1.txt fileOne.txt

The Rename-Item cmdlet can change the name of a file or a folder, but it cannot move an item. The following command fails because it attempts to move the file from the New.Directory directory to the Temp directory.

PS> Rename-Item -Path C:\temp\New.Directory\fileOne.txt c:\temp\fileOne.txt
Rename-Item : Cannot rename because the target specified is not a path.
At line:1 char:12
+ Rename-Item  <<<< -Path C:\temp\New.Directory\fileOne c:\temp\fileOne.txt

Moving Items (Move-Item)

To move a file or folder, use the Move-Item cmdlet.

For example, the following command moves the New.Directory directory from the C:\temp directory to the root of the C: drive. To verify that the item was moved, include the PassThru parameter of the Move-Item cmdlet. Without Passthru, the Move-Item cmdlet does not display any results.

PS> Move-Item -Path C:\temp\New.Directory -Destination C:\ -PassThru

	Directory: Microsoft.Windows PowerShell.Core\FileSystem::C:\

Mode				LastWriteTime	 Length Name
----				-------------	 ------ ----
d----		2006-05-18  12:14 PM			New.Directory

Copying Items (Copy-Item)

If you are familiar with the copy operations in other shells, you might find the behavior of the Copy-Item cmdlet in Windows PowerShell to be unusual. When you copy an item from one location to another, Copy-Item does not copy its contents by default.

For example, if you copy the New.Directory directory from the C: drive to the C:\temp directory, the command succeeds, but the files in the New.Directory directory are not copied.

PS> Copy-Item -Path C:\New.Directory -Destination C:\temp

If you display the contents of C:\temp\New.Directory, you will find that it contains no files:

PS> Get-ChildItem -Path C:\temp\New.Directory

Why doesn't the Copy-Item cmdlet copy the contents to the new location?

The Copy-Item cmdlet was designed to be generic; it is not just for copying files and folders. Also, even when copying files and folders, you might want to copy only the container and not the items within it.

To copy all of the contents of a folder, include the Recurse parameter of the Copy-Item cmdlet in the command. If you have already copied the directory without its contents, add the Force parameter, which allows you to overwrite the empty folder.

PS> Copy-Item -Path C:\New.Directory -Destination C:\temp -Recurse -Force -Passthru
	Directory: Microsoft.Windows PowerShell.Core\FileSystem::C:\temp

Mode				LastWriteTime	 Length Name
----				-------------	 ------ ----
d----		2006-05-18   1:53 PM			New.Directory

	Directory: Microsoft.Windows PowerShell.Core\FileSystem::C:\temp\New.Directory

Mode				LastWriteTime	 Length Name
----				-------------	 ------ ----
-a---		2006-05-18  11:44 AM		0 file1

Deleting Items (Remove-Item)

To delete files and folders, use the Remove-Item cmdlet. Windows PowerShell cmdlets, such as Remove-Item, that can make significant, irreversible changes will often prompt for confirmation when you enter its commands. For example, if you try to remove the New.Directory folder, you will be prompted to confirm the command, because the folder contains files:

PS> Remove-Item C:\New.Directory

The item at C:\temp\New.Directory has children and the -recurse parameter was not
specified. If you continue, all children will be removed with the item. Are you
 sure you want to continue?
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help
(default is "Y"):

Because Yes is the default response, to delete the folder and its files, press the Enter key. To remove the folder without confirming, use the -Recurse parameter.

PS> Remove-Item C:\temp\New.Directory -Recurse

Executing Items (Invoke-Item)

Windows PowerShell uses the Invoke-Item cmdlet to perform a default action for a file or folder. This default action is determined by the default application handler in the registry; the effect is the same as if you double-click the item in Windows Explorer.

For example, suppose you run the following command:

PS> Invoke-Item C:\WINDOWS

An Explorer window that is located in C:\Windows appears, just as if you had double-clicked the C:\Windows folder.

If you invoke the Boot.ini file on a system prior to Windows Vista:

PS> Invoke-Item C:\boot.ini

If the .ini file type is associated with Notepad, the boot.ini file opens in Notepad.