You can use the Process cmdlets in Windows PowerShell to manage local and remote processes in Windows PowerShell.

Getting Processes (Get-Process)

To get the processes running on the local computer, run a Get-Process with no parameters.

You can get particular processes by specifying their process names or process IDs. The following command gets the Idle process:

PS> Get-Process -id 0
Handles  NPM(K)	PM(K)	WS(K) VM(M)   CPU(s)	 Id ProcessName
-------  ------	-----	----- -----   ------	 -- -----------
	0	 0		0		 16	 0			 0 Idle

Although it is normal for cmdlets to return no data in some situations, when you specify a process by its ProcessId, Get-Process generates an error if it finds no matches, because the usual intent is to retrieve a known running process. If there is no process with that Id, it is likely that the Id is incorrect or that the process of interest has already exited:

PS> Get-Process -Id 99
Get-Process : No process with process ID 99 was found.
At line:1 char:12
+ Get-Process  <<<< -Id 99

You can use the Name parameter of the Get-Process cmdlet to specify a subset of processes based on the process name. The Name parameter can take multiple names in a comma-separated list and it supports the use of wildcards, so you can type name patterns.

For example, the following command gets process whose names begin with "ex."

PS> Get-Process -Name ex*
Handles  NPM(K)	PM(K)	WS(K) VM(M)   CPU(s)	 Id ProcessName
-------  ------	-----	----- -----   ------	 -- -----------
	234	 7	 5572	12484   134	 2.98   1684 EXCEL
	555	15	34500	12384   134   105.25	728 explorer

Because the .NET System.Diagnostics.Process class is the foundation for Windows PowerShell processes, it follows some of the conventions used by System.Diagnostics.Process. One of those conventions is that the process name for an executable never includes the ".exe" at the end of the executable name.

Get-Process also accepts multiple values for the Name parameter.

PS> Get-Process -Name exp*,power* 
Handles  NPM(K)	PM(K)	WS(K) VM(M)   CPU(s)	 Id ProcessName
-------  ------	-----	----- -----   ------	 -- -----------
	540	15	35172	48148   141	88.44	408 explorer
	605	 9	30668	29800   155	 7.11   3052 powershell

You can use the ComputerName parameter of Get-Process to get processes on remote computers. For example, the following command gets the PowerShell processes on the local computer (represented by "localhost") and on two remote computers.

PS> Get-Process -Name PowerShell -ComputerName localhost, Server01, Server02
Handles  NPM(K)	PM(K)	WS(K) VM(M)   CPU(s)	 Id ProcessName
-------  ------	-----	----- -----   ------	 -- -----------
	258	 8	29772	38636   130			3700 powershell
	398	24	75988	76800   572			5816 powershell
	605	 9	30668	29800   155	 7.11   3052 powershell

The computer names are not evident in this display, but they are stored in the MachineName property of the process objects that Get-Process returns. The following command uses the Format-Table cmdlet to display the process ID, ProcessName and MachineName (ComputerName) properties of the process objects.

PS> Get-Process -Name PowerShell -ComputerName localhost, Server01, Server01 | Format-Table -Property ID, ProcessName, MachineName
  Id ProcessName MachineName
  -- ----------- -----------
3700 powershell  Server01
3052 powershell  Server02
5816 powershell  localhost

This more complex command adds the MachineName property to the standard Get-Process display. The backtick (`)(ASCII 96) is the Windows PowerShell continuation character.

get-process powershell -computername localhost, Server01, Server02 | format-table -property Handles, `
					@{Label="NPM(K)";Expression={[int]($_.NPM/1024)}}, `
					@{Label="PM(K)";Expression={[int]($_.PM/1024)}}, `
					@{Label="WS(K)";Expression={[int]($_.WS/1024)}}, `
					@{Label="VM(M)";Expression={[int]($_.VM/1MB)}}, `
					@{Label="CPU(s)";Expression={if ($_.CPU -ne $()` 
					{$_.CPU.ToString("N")}}}, `																		 
					Id, ProcessName, MachineName -auto

Handles  NPM(K)  PM(K) WS(K) VM(M) CPU(s)  Id ProcessName  MachineName
-------  ------  ----- ----- ----- ------  -- -----------  -----------
	258	 8  29772 38636   130		 3700 powershell Server01
	398	24  75988 76800   572		 5816 powershell localhost
	605	 9  30668 29800   155 7.11	3052 powershell Server02

Stopping Processes (Stop-Process)

Windows PowerShell gives you flexibility for listing processes, but what about stopping a process?

The Stop-Process cmdlet takes a Name or Id to specify a process you want to stop. Your ability to stop processes depends on your permissions. Some processes cannot be stopped. For example, if you try to stop the idle process, you get an error:

PS> Stop-Process -Name Idle
Stop-Process : Process 'Idle (0)' cannot be stopped due to the following error:
 Access is denied
At line:1 char:13
+ Stop-Process  <<<< -Name Idle

You can also force prompting with the Confirm parameter. This parameter is particularly useful if you use a wildcard when specifying the process name, because you may accidentally match some processes you do not want to stop:

PS> Stop-Process -Name t*,e* -Confirm
Are you sure you want to perform this action?
Performing operation "Stop-Process" on Target "explorer (408)".
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help
(default is "Y"):n
Are you sure you want to perform this action?
Performing operation "Stop-Process" on Target "taskmgr (4072)".
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help
(default is "Y"):n

Complex process manipulation is possible by using some of the object filtering cmdlets. Because a Process object has a Responding property that is true when it is no longer responding, you can stop all nonresponsive applications with the following command:

Get-Process | Where-Object -FilterScript {$_.Responding -eq $false} | Stop-Process

You can use the same approach in other situations. For example, suppose a secondary notification area application automatically runs when users start another application. You may find that this does not work correctly in Terminal Services sessions, but you still want to keep it in sessions that run on the physical computer console. Sessions connected to the physical computer desktop always have a session ID of 0, so you can stop all instances of the process that are in other sessions by using Where-Object and the process, SessionId:

Get-Process -Name BadApp | Where-Object -FilterScript {$_.SessionId -neq 0} | Stop-Process

The Stop-Process cmdlet does not have a ComputerName parameter. Therefore, to run a stop process command on a remote computer, you need to use the Invoke-Command cmdlet. For example, to stop the PowerShell process on the Server01 remote computer, type:

Invoke-Command -ComputerName Server01 {Stop-Process Powershell}

Stopping All Other Windows PowerShell Sessions

It may occasionally be useful to be able to stop all running Windows PowerShell sessions other than the current session. If a session is using too many resources or is inaccessible (it may be running remotely or in another desktop session), you may not be able to directly stop it. If you try to stop all running sessions, however, the current session may be terminated instead.

Each Windows PowerShell session has an environment variable PID that contains the Id of the Windows PowerShell process. You can check the $PID against the Id of each session and terminate only Windows PowerShell sessions that have a different Id. The following pipeline command does this and returns the list of terminated sessions (because of the use of the PassThru parameter):

PS> Get-Process -Name powershell | Where-Object -FilterScript {$_.Id -ne $PID} | Stop-Process -
Handles  NPM(K)	PM(K)	WS(K) VM(M)   CPU(s)	 Id ProcessName
-------  ------	-----	----- -----   ------	 -- -----------
	334	 9	23348	29136   143	 1.03	388 powershell
	304	 9	23152	29040   143	 1.03	632 powershell
	302	 9	20916	26804   143	 1.03   1116 powershell
	335	 9	25656	31412   143	 1.09   3452 powershell
	303	 9	23156	29044   143	 1.05   3608 powershell
	287	 9	21044	26928   143	 1.02   3672 powershell

Starting, Debugging, and Waiting for Processes

Windows PowerShell also comes with cmdlets to start (or restart), debug a process, and wait for a process to complete before running a command. For information about these cmdlets, see the cmdlet help topic for each cmdlet.

See Also