Assigns a drive letter or mount point to the volume with focus.
For examples of how this command can be used, see Examples.
Syntax
assign [{letter=<d> | mount=<path>}] [noerr]
Parameters
| Parameter | Description |
|---|---|
|
letter=<d> |
The drive letter you want to assign to the volume. |
|
mount=<path> |
The mount point path you want to assign to the volume. |
|
noerr |
For scripting only. When an error is encountered, DiskPart continues to process commands as if the error did not occur. Without this parameter, an error causes DiskPart to exit with an error code. |
Remarks
- If no drive letter or mount point is specified, the next
available drive letter is assigned. If the drive letter or mount
point is already in use, an error is generated.
- By using the assign command, you can change the drive letter
associated with a removable drive.
- You cannot assign drive letters to system volumes, boot
volumes, or volumes that contain the paging file. In addition, you
cannot assign a drive letter to an Original Equipment Manufacturer
(OEM) partition or any GUID Partition Table (GPT) partition other
than a basic data partition.
- A volume must be selected for this operation to succeed. Use
the select volume command to select a volume and shift the
focus to it.
Examples
To assign the letter E to the volume in focus, type:
assign letter=e