dump

• You can dump the contents of the current configuration to a file that can be used to restore altered configuration settings.
  
  

The following commands save the current configuration as a script in the c:\test\dnsproxycfg.dmp file.

• From the command prompt:
  
  netsh routing ip dnsproxy dump > c:\test\dnsproxycfg.dmp
  
  
• From the netsh routing ip dnsproxy context prompt:
  
  set file open c:\test\dnsproxycfg.dmp
  
  dump
  
  set file close
  
  

You can use the netsh exec command to run the script created by the netsh dump command.

set global

[ [ querytimeout = ] Integer ]

[ [ dnsmode = ] { enable | disable } ]

[ [ loglevel = ] { none | error | warn | info } ]

[ querytimeout = ] Integer

Required. Specifies a timeout, in seconds, for proxied DNS queries.

[ dnsmode = ] { enable | disable }

Specifies whether the DNS proxy operation is enabled or disabled.

[ loglevel = ] { none | error | warn | info }

Specifies which events should be logged.

• none specifies that no events related to DNS proxy should be logged.
  
  
• error specifies that only errors related to DNS proxy should be logged.
  
  
• warn specifies that both errors and warnings related to DNS proxy should be logged.
  
  
• info specifies that all events related to DNS proxy should be logged.
  
  

To specify that queries should time out after 10 seconds, to enable DNS proxy operation, and to prevent logging of DNS proxy events, type:

set global 10 enable none

install

set interface

[ name = ] InterfaceName

[ [ mode = ] { enable | disable | default } ]

[ name = ] InterfaceName

Required. Specifies, by name, the interface for which to configure parameters. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

[ mode = ] { enable | disable | default }

Specifies whether DNS proxy is enabled, disabled, or set to use the default for the specified interface.

• enable specifies that DNS proxy is enabled.
  
  
• disable specifies that DNS proxy is disabled.
  
  
• default specifies that DNS proxy is set according to the default for the interface.
  
  

To enable DNS proxy for interface Local Area Connection, type:

set interface name="Local Area Connection" mode=enable

show global

show interface

[ name = ] InterfaceName

[ name = ] InterfaceName

Required. Specifies, by name, the interface for which you want to display information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

uninstall