The following commands are specific to the routing IP dnsproxy context within the Netsh environment.
To view the command syntax, click a command:
Set commands
Show commands
Netsh commands for routing IP dnsproxy
The following entries provide details for each command.
dump
Displays the DNS proxy configuration of a remote access server in script form.
Syntax
dump
Remarks
- You can dump the contents of the current configuration to a
file that can be used to restore altered configuration
settings.
Example
The following command saves the current configuration as a script in the routingipdnsproxy.dmp file.
dump > routingipdnsproxy.dmp
set global
Sets global DNS proxy parameters for all routed interfaces.
Syntax
set global
[querytimeout=] Integer
[[dnsmode=] {enable | disable}]
[[loglevel=] {none | error | warn | info}]
Parameters
- [querytimeout=] Integer
- Required. Specifies a timeout, in seconds, for proxied DNS queries.
- [[dnsmode=] {enable | disable}]
- Specifies whether DNS proxy operation is enabled or disabled.
- [[loglevel=] {none | error| warn| info}]
- Specifies which events should be logged. The none parameter specifies that no events related to DNS proxy should be logged. The error parameter specifies that only errors related to DNS proxy should be logged. The warn parameter specifies that only warnings related to DNS proxy should be logged. The info parameter specifies that all events related to DNS proxy should be logged.
Example
To specify that queries should time out after 10 seconds, to enable DNS proxy operation, and to prevent logging of DNS proxy events, type:
set global 10 enable none
install
Installs the routing protocol under IP.
Syntax
install
set interface
Configures DNS proxy parameters for an interface.
Syntax
set interface
[name=] InterfaceName
[[mode=] {enable | disable | default}]
Parameters
- [name=] InterfaceName
- Required. Specifies, by name, the interface for which to configure parameters. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").
- [[mode=] {enable | disable | default}]
- Specifies whether DNS proxy is enabled, disabled, or set to use the default for the specified interface. The enable parameter specifies that DNS proxy is enabled. The disable parameter specifies that DNS proxy is disabled. The default parameter specifies that DNS proxy is set according to the default for the interface.
Example
To enable DNS proxy for interface Local Area Connection, type:
set interface name="Local Area Connection" mode=enable
show global
Displays the DNS proxy global configuration.
Syntax
show global
show interface
Displays the DNS proxy configuration for the specified interface.
Syntax
show interface
[name=] InterfaceName
Parameters
- [name=] InterfaceName
- Required. Specifies, by name, the interface for which you want to display information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").
uninstall
Removes the routing protocol under IP.
Syntax
uninstall